SENGDEK® SuperRib
SuperRib is one of SJ Classic signature products. Its effectively long width and architectural design make it suitable and ideal for the needs of commercial, industrial, residential or any building project roofing and wall cladding. SuperRib is formed and made from the highest quality of steel coil available in a range of coating either PPGI (Pre-painted Galvanized) or Aluzinc.

SuperRib is the most popular metal roofing sheet in Malaysia. Its benefits include easy-to-install and excellent durability. User-friendly SuperRib can be customized to any specific length, leading any building project to cost-saving and minimize environmental impact rooted by material waste.

It can be transformed to

SENGDEK® SuperRib Crimp Curve

SuperRib Crimp Curve is best suited for any awning or metal works. It has been widely used in any corner of Malaysia to provide roofing solution for users. Its innovative design and aesthetical appearance meet the best of modern metal roofing technology. It can be customized into standard curve, semi-curve or any special design crimp curve.

Advantages :

  • User-friendly
  • Flexible and Durable
  • Cost effective
  • Quick & simple installation
Technical Data & Specification
Profile
SuperRib
Effective Width
762mm
Depth of Rib
25mm
Steel Standard
MS2383(Colour)/MS1196(Bare)
Yield strength (MPa)
G300/G550
Minimum Roof Pitch
Tolerance
Thickness ±0.03mm Width ±3mm Length ±5mm

Specification Drawings : SuperRib & Crimp Curve

Specification Drawings : SuperRib Crimp Curve (Dimensions)

Specification Drawings : SuperRib Crimp Curve (Dimensions)

Specification Drawings : SuperRib Crimp Curve (Dimensions)

Thickness Available Chart
Base Metal Thickness (BMT)
0.20mm
0.25mm
0.30mm
0.35mm
0.42mm
0.48mm
Total Coated Thickness (TCT)
0.24mm
0.30mm
0.35mm
0.40mm
0.47mm
0.53mm
Weight (kg/m2)
1.99
2.46
2.93
3.46
4.20
4.76
Min Yield Strength (MPa)
G300/G550
G300/G550
G300/G550
G300/G550
G300/G550
G300/G550
Recommended Maximum Roof Length (G550/M)
Rainfall Intensity (mm/hour)
150
200
250
300
Slope In Degree
50
39
30
26
60
50
40
30
80
60
48
40
Recommended Maximum Spacing of Supports
Base Metal Thickness (mm)
0.35
0.42
0.48
Total Coated Thickness (mm)
0.40
0.47
0.53
Roof
End Span (mm)
900
1200
1300
Internal Span (mm)
1000
1500
1700
Wall
End Span (mm)
1200
1700
2000
Internal Span (mm)
1500
2000
2300
Overhang (mm)
100
150
250